Pneumatic Knife Gate Valve Manufacturer

Valvesonly Europe is the prime Pneumatic Knife Gate Valve Manufacturer in Germany. A Pneumatic Knife Gate Valve is a type of valve used in pipelines to control the flow of fluid. The valve operates using compressed air and is actuated by a pneumatic actuator. The valve features a blade or gate that moves vertically to open or close the flow of fluid. The key advantage of a Pneumatic Knife Gate Valve is that it can be controlled remotely using compressed air, which makes it easier to operate and maintain.

A gate valve is a type of valve that is used to control the flow of fluid in a pipeline. The valve features a flat or slightly curved disc or gate that moves up or down to open or close the flow of fluid. The gate is usually attached to a stem that is connected to an actuator, which is used to open and close the valve.

The working principle of a pneumatic knife gate valve is When the valve is closed, the blade or gate is positioned vertically in the center of the pipeline, obstructing the flow of fluid. When compressed air is supplied to the pneumatic actuator, it pushes the stem, which is connected to the blade. The blade is then lifted out of the way, allowing fluid to flow freely through the pipeline. When compressed air is released from the pneumatic actuator, the blade is returned to its original position, closing the flow of fluid through the pipeline. This process of opening and closing the flow of fluid can be repeated as needed, allowing the flow of fluid to be easily controlled using compressed air.

Valvesonly Europe is one of the best Pneumatic Knife Gate Valve Manufacturer in Germany which provides a variety of shapes, sizes, and thicknesses. All the products are tested according to requirements and standards.

Advantages of Pneumatic Knife Gate valve:

  • Remote Control
  • Fast and efficient
  • Durable and reliable
  • Easy maintenance
  • Cost-effective

Industries of Pneumatic Knife Gate valve:

  • Mining
  • Power Generation
  • Wastewater treatment
  • Pulp and paper
  • Chemical and petrochemical
  • Marine and offshore

Parts of Pneumatic Knife Gate valve:

  • Body
  • Gate
  • Stem
  • Bonnet
  • Yoke
  • Handwheel

Description:

  • Available materials: WCB, WC6, WCC, LCB, LCC, Cast iron, Ductile Iron, SS316, SS304
  • Size: 2″ to 80″
  • Class: 150 to 300
  • Nominal Pressure: PN6 to PN40
  • Operation: Handwheel, Electric and Pneumatic Actuated, Gear operated
  • Ends: Wafer, Lug, Flanged

Pneumatic actuator details

  • Torque – 3 – 9000 nm
  • Operating pressure- 8 Bar
  • Port Connection-NPT1.4”
  • Mounting Base-ISO5211
  • Temperature–20°C – +80°C

Showing all 2 results

  • Sale!
    194.40

    Pneumatic Bi Directional Knife Gate Valve

    Pneumatic Bi Directional Knife Gate Valve Specification: Size: DN50 to DN1000 Nominal Pressure: PN6, PN10, PN16. Flange connection apply for PN6, PN10, PN16. Pressure rating and temperature: Size Pressure rating Body seal Seat seal Working temperature DN50 – DN200 PN10 15 bar 10 bar NBR (-10 – 80oC) DN250-DN300 PN6 9 bar 6 bar NBR […]

  • Sale!
    151.20

    Pneumatic Unidirectional Knife Gate Valve

    Pneumatic Unidirectional Knife Gate Valve NO. PART NAME MATERIAL 01 BODY CF8M CF8 WCB 02 GATE 304 304 316 03 SEAT MENTAL OR EPDM 04 O-RING NBR 05 SEAT RETAINER WCB CF8 CF8M 06 PACKING PTFE 07 GLAND WCB CF8 CF8M 08 YOKE Q235 304 304 09 STEM 2CR13 2CR13 2CR13 10 STEM NUT BRASS […]