Mining
API Certified
Designed & tested as per API Standards
ISO Certified
Designed & tested as per API Standards
ANSI Certified
Designed & tested as per API Standards
CE Compliant
European directives & PDE Compliance
API Certified
Designed & tested as per API Standards
ISO Certified
Designed & tested as per API Standards
ANSI Certified
Designed & tested as per ANSI standards.
CE Compliant
European directives & PDE Compliance
Valves for the Mining Industry
Mining operations handle abrasive slurry, mineral concentrates, tailings, process water, chemicals and other demanding fluids. Valves are used for pipeline isolation, flow control and pump protection across extraction, mineral processing and waste-handling systems. ValvesOnly Europe provides valve solutions for mining applications where internal geometry, wear resistance, material compatibility and operating performance must suit the process conditions.
Mining and Slurry Service Conditions
Selecting a mining valve requires consideration of both the liquid and the solids moving through the pipeline.
- Solids Concentration and Density – Affect flow behaviour, valve operation and the force required to close the valve
- Particle Size and Hardness – Determine the expected abrasion of gates, seats, sleeves and internal surfaces
- Flow Velocity – Higher velocity can accelerate erosion and damage valve components
- Solids Settlement – Valve geometry should minimise cavities where particles can collect and restrict movement
- Pressure Differential – Influences valve sizing, actuator torque, pressure drop and sealing performance
- Chemical Composition – Determines the corrosion resistance required from wetted materials
- Operating Frequency – Frequently cycled valves require durable seats, actuators and replaceable wear components
Valve Types Used in Mining
The valve design depends on whether the service involves slurry, tailings, process water, chemicals or air.
- Slurry Knife Gate Valve – Provides isolation for abrasive slurry and solids-laden fluids with a flow path designed to reduce material accumulation
- Ball Valve – Quick shut-off for water, air, chemicals and compatible process media
- Gate Valve – Low-restriction isolation for suitable process-water and utility systems
- Check Valve – Prevents reverse flow through pumps and pipelines
- Control Valve – Regulates flow and pressure in suitable process applications
- Diaphragm Valve – Isolates selected corrosive fluids and low-concentration slurry
Mining Valve Applications
Valves are installed across mining and mineral-processing facilities, including:
- Mine Dewatering Systems – Isolation and control of water-removal networks
- Slurry and Tailings Pipelines – Handling of abrasive, solids-bearing material
- Grinding and Flotation Circuits – Flow control around mills, flotation cells and related equipment
- Thickeners and Filtration Units – Management of process water, underflow and filter connections
- Leaching and Chemical Systems – Isolation of corrosive solutions and treatment chemicals
- Concentrate Handling – Pipeline isolation during mineral transfer
- Process-Water Networks – Distribution of water throughout the processing plant
Materials for Mining and Slurry Valves
Material selection must address abrasion, corrosion, slurry chemistry and temperature.
- Carbon and Stainless Steel – Used for bodies, pressure-containing components and compatible process services
- Special Alloys – Hastelloy, Alloy 20 or Titanium for specific corrosive leaching and chemical applications
- Stainless Steel – Suitable for corrosive process water and compatible slurry applications
- Duplex Stainless Steel – Selected for corrosive and chloride-bearing mine water
- Super Duplex Stainless Steel – Used in severe chloride and corrosive environments
- Hastelloy – Suitable for highly corrosive leaching and chemical-processing services
- Alloy 20 – Selected for acidic mineral-processing applications
Mining Valve Technical Details
- Size and Pressure: Selected according to pipeline diameter, slurry properties, flow rate and design pressure
- Operation: Manual, gear-operated, electric, pneumatic or hydraulic
- End Connections: Flanged, wafer, lugged, threaded or welded, depending on valve design
- Design Standards: ASME B16.34, MSS SP-81, API 609 or applicable EN standards, depending on valve type
- Testing: API 598, ISO 5208 or EN 12266-1, where applicable
- Special Requirements: Replaceable sleeves, wear liners, hardened trim, flushing connections or abrasion-resistant sealing arrangements
As a mining valve manufacturer, ValvesOnly Europe provides mining valve configurations matched to the slurry characteristics, pressure, materials, connections and operating requirements of each application.
Need a Valve Solution For Your Project?
Talk to our engineer today and get a customised quote within 24 hours!
